SI-2698

1. 时尚的外观设计，Gasket结构，手感细腻软弹。
2. 键帽（选配)和机械开关(选配）可插拨，用户也可以购买市面上各品牌开关和个性化键帽自由DIY。
3. 键盘用料扎实，按键反应灵敏。
4. 键盘右上角带1.14英寸TFT显示屏，功能多样，可配合驱动DIY。键盘右上角旋钮和按键，可配合TFT屏幕，旋钮旋转调节菜单，旋钮短按分别是确定并返回上一级菜单。
5. 键盘TFT屏幕带时间显示和日历显示。出厂或平时使用关了底部电源开关，需打开电源开关并用驱动校准时间和日历。
6. 键盘TFT屏幕带电量显示，充电与剩余电量一目了然。
7. 从上往下 3个独立指示灯分别指示：CAP/SCR/锁WIN，TFT屏幕主菜单上对应图标也会对应高亮显示。
8. 键盘右上角模式开关从左往右：2.4G模式/有线模式/蓝牙模式。
9. 右上角开关拨到左边=2.4G模式  FN+`~显示“2.4G回连中”，长按FN+`~5S屏幕显示“2.4G配对中”，插入接收器屏幕显示“2.4G配对成功”，对码成功。注意:2.4G连接时先搜索再插接收器。出厂默认已对码。TFT屏幕主菜单上对应图标也会高亮显示。
10. 右上角模式开关拨到右边=蓝牙模式BLE5.1，可以连接3个设备:

(1) (FN+1)=蓝牙1（设备名“AULA-S87Pro-1”） 单按(FN+1)显示“BT1回连中” 长按(FN+1)显示“BT1配对中” 连接成功屏幕显示“BT1配对成功”TFT屏幕主菜单上对应图标也会高亮显示。

(2) (FN+2)=蓝牙2（设备名“AULA-S87Pro-2”） 单按(FN+2)显示“BT2回连中” 长按(FN+2)5S屏幕显示“BT2配对中” 连接成功屏幕显示“BT2配对成功”TFT屏幕主菜单上对应图标也会高亮显示。

(3) (FN+3)=蓝牙3（设备名“AULA-S87Pro-3”） 单按(FN+3)显示“BT3回连中” 长按(FN+3)5S屏幕显示“BT3配对中” 连接成功屏幕显示“BT3配对成功”TFT屏幕主菜单上对应图标也会高亮显示。

11. FN+Q=Android系统、FN+W=Windows系统、FN+E=Mac系统、FN+R=IOS系统。切换到Mac/IOS系统后左WIN/左ALT位置互换，Mac/IOS/Android不锁WIN。
12. 在TFT屏幕滚动到“灯光效果”模式切换19种RGB灯效和关闭共20种灯效：随波逐流（默认）、峰回路转、一触即发、一石二鸟、涟漪扩散、川流不息、重峦叠嶂、斜风细雨、来回穿梭、静态恒亮、单点亮、单熄灭、繁星点点、漫天飞雪、百花争艳、动态呼吸、光谱循环、彩泉涌动、多彩纵横、关闭。
13. 在TFT屏幕滚动到“灯光颜色”模式切换RGB、红、橙、黄、绿、青、蓝、紫、白。
14. 在TFT屏幕滚动到“灯光亮度”模式切换5档亮度，每档20%。旋钮顺时针旋转灯光亮度+，逆时针旋转灯光亮度-。
15. 在TFT屏幕滚动到“灯光速率”模式切换5档速率，每档20%。旋钮顺时针旋转灯光速度+，逆时针旋转灯光速度-。
16. 在TFT屏幕滚动到“音量调节”模式顺时针调大音量，逆时针调小音量，对应音量大小图标闪动。
17. 在TFT屏幕滚动到“语言选择”模式切换中英文。
18. 在TFT滚动到自定义图片，用驱动可以自定义图片。
19. 配合驱动带音乐律动RGB灯效。
20. 有线模式和2.4G配合驱动各键带自定义功能，宏定义。驱动可自定义1600多万种颜色。
21. 键盘人性化设计，与Fn配合增加一系列常用快捷功能按键。
22. 键盘两侧氛围灯,FN+右Shift=调侧灯模式，FN+/?=调侧灯颜色，FN+右Alt=调节侧灯亮度，FN+右Ctrl=调侧灯速度。
23. Fn+Esc长按三秒= 恢复默认并显示开机画面。原来连接的蓝牙设备保存不会清除。
    1. Boasting a stylish look and Gasket structure, this keyboard delivers a soft and bouncy typing experience.
    2. Hot-swappable keycaps and mechanical switches are optional. Users can replace them with third-party switches and custom keycaps available on the market for DIY use.
    3. It features solid construction and highly responsive keys.
    4. A 1.14-inch TFT display is built on the upper right, supporting diverse functions and DIY settings via dedicated driver software. Equipped with a knob and buttons beside the TFT screen, the knob navigates through menus; a short press on the knob confirms selections and returns to the previous menu.
    5. The TFT screen displays time and calendar. If the bottom power switch is turned off during factory settings or daily use, please switch it on and calibrate time and calendar via the driver.
    6. Real-time battery level is shown on the TFT screen, so you can easily check charging status and remaining power.
    7. Three indicator lights from top to bottom stand for Caps Lock, Scroll Lock and Win Lock respectively. The corresponding icons on the TFT main menu will light up simultaneously.
    8. The mode switch on the upper right has three positions from left to right: 2.4G Mode, Wired Mode and Bluetooth Mode.
    9. Slide the switch to the left to enable 2.4G Mode. Press **Fn + ` ~**, and the screen will show “2.4G Reconnecting”. Press and hold **Fn + ` ~** for 5 seconds to enter pairing mode, with the screen displaying “2.4G Pairing”. Insert the receiver, and the screen will prompt “2.4G Connected”. Note: Enable pairing first before inserting the receiver. The keyboard is pre-paired by default. The matching icon on the TFT main menu will light up.
    10. Slide the switch to the right to activate BLE 5.1 Bluetooth Mode, which supports connection to up to 3 devices:

    (1) Press **Fn + 1** for Bluetooth 1 (Device Name: AULA-S87Pro-1). A single press shows “BT1 Reconnecting”. Press and hold the key combination to enter pairing mode with the screen showing “BT1 Pairing”. It will display “BT1 Connected” once paired successfully, and the related icon on the TFT main menu will light up.

    (2) Press **Fn + 2** for Bluetooth 2 (Device Name: AULA-S87Pro-2). A single press shows “BT2 Reconnecting”. Press and hold the key combination for 5 seconds to enter pairing mode with the screen showing “BT2 Pairing”. It will display “BT2 Connected” once paired successfully, and the related icon on the TFT main menu will light up.

    (3) Press **Fn + 3** for Bluetooth 3 (Device Name: AULA-S87Pro-3). A single press shows “BT3 Reconnecting”. Press and hold the key combination for 5 seconds to enter pairing mode with the screen showing “BT3 Pairing”. It will display “BT3 Connected” once paired successfully, and the related icon on the TFT main menu will light up.

    11. **Fn + Q** for Android System, **Fn + W** for Windows System, **Fn + E** for Mac System, **Fn + R** for iOS System. After switching to Mac or iOS System, the left Win key and left Alt key will swap positions. The Win key will not be locked under Mac, iOS and Android systems.
    12. Navigate to Lighting Effects on the TFT screen to choose from 19 RGB lighting styles or turn off the backlight, 20 modes in total: Drifting Waves (Default), Twisting Path, Instant Trigger, Double Strike, Ripple Spread, Flowing Stream, Rolling Mountains, Drizzling Rain, Back & Forth, Static Light, Single Point On, Single Point Off, Twinkling Stars, Snow Falling, Blooming Flowers, Dynamic Breathing, Spectrum Cycle, Colorful Stream, Colorful Cross and Backlight Off.
    13. Navigate to Lighting Color on the TFT screen to select colors including RGB, Red, Orange, Yellow, Green, Cyan, Blue, Purple and White.
    14. Navigate to Lighting Brightness on the TFT screen. There are 5 brightness levels (20% per level). Turn the knob clockwise to increase brightness and counterclockwise to decrease it.
    15. Navigate to Lighting Speed on the TFT screen. There are 5 speed levels (20% per level). Turn the knob clockwise to speed up the light effect and counterclockwise to slow it down.
    16. Navigate to Volume Control on the TFT screen. Turn the knob clockwise to raise the volume and counterclockwise to lower it. The volume icon will flash accordingly.
    17. Navigate to Language Settings on the TFT screen to switch between Chinese and English.
    18. Navigate to Custom Image on the TFT screen. Custom images can be uploaded via the driver.
    19. It supports music-sync RGB lighting effects when used with the driver.
    20. All keys support custom functions and macro definition under Wired Mode and 2.4G Mode via the driver. Over 16 million colors are available for customization.
    21. Adopting an ergonomic layout, it provides abundant commonly used shortcut keys via Fn combinations.
    22. Equipped with ambient lights on both sides. **Fn + Right Shift** to adjust side light modes; **Fn + / ?** to change side light colors; **Fn + Right Alt** to adjust side light brightness; **Fn + Right Ctrl** to adjust side light speed.
    23. Press and hold **Fn + Esc** for 3 seconds to restore factory settings and display the boot screen. Paired Bluetooth device records will not be cleared.